Numerical Modeling of an Industrial Aluminum Melting Furnace
Author:
Nieckele Angela O.1, Naccache Mo^nica F.1, Gomes Marcos S. P.1
Affiliation:
1. Department of Mechanical Engineering, Pontifı´cia Universidade Cato´lica do Rio de Janeiro, Rua Marque^s de Sa˜o Vicente, 225, 22453-900, Rio de Janeiro, Brazil
Abstract
For the present work, a numerical simulation of the 100% oxy-firing combustion process inside an industrial aluminum remelting reverb furnace is presented. Three different configurations were analyzed: (i) a staged combustion process with parallel injection jets for oxygen and natural gas, (ii) a staged combustion process with a divergent jet for the oxygen, and (iii) a non-staged combustion process, with parallel jets. In all the cases, the injections were directed towards the aluminum bath, which was maintained at constant temperature. The numerical procedure was based on the finite volume formulation. The κ-ε model of turbulence was selected for simulating the turbulent flow field. The combustion process was calculated based on the finite rate models of Arrhenius and Magnussen, and the Discrete Transfer Radiation model was employed for predicting the radiation heat transfer. The numerical predictions allowed the determination of the flame patterns, species concentration distribution, temperature and velocity fields. This kind of analysis can be a powerful tool for evaluating design options such as the type, number and positioning of the burners. The present work illustrates a preliminary comparison of three types of burners. From the results obtained, the staged combustion process with a divergent jet presented the best configuration, since the flame length was not too long as to damage the refractory wall. Further it presented the largest region with low water vapor concentration close to the aluminum surface.
Publisher
ASME International
Subject
Geochemistry and Petrology,Mechanical Engineering,Energy Engineering and Power Technology,Fuel Technology,Renewable Energy, Sustainability and the Environment
Reference32 articles.
1. Goldin, G. M., and Menon, S. A., 1998, “Comparison of Scalar PDF Turbulent Combustion Models,” Combust. Flame, 113(3), pp. 442–453. 2. Gran, I. R., Ertesva^g, I. S., and Magnussen, B. F., 1997, “Influence of Turbulence Modeling on Predictions of Turbulent Combustion,” AIAA J., 35(1), pp. 106–110. 3. Ma, C. Y., Mahmud, T., Gaskell, P. H., and Hampartsoumian, E., 1999, “Numerical Predictions of a Turbulent Diffusion Flame in a Cylindrical Combustor Using Eddy Dissipation and Flamelet Combustion Models,” Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 213(7), pp. 697–705. 4. Zimont, V., Polifke, W., and Bettelini, M., 1998, “An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure,” J. Eng. Gas Turbines Power, 120(3), pp. 526–532. 5. Goldin, G., and Choudhury, D., 2001, “Steady State Simulation of a Methane-Air Partially Premixed Turbulent Flame,” 2001 ASME-IMECE, USA, CD-ROM, HTD-24233.
Cited by
32 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|