Affiliation:
1. Department of Mechanical Engineering, Chonnam National University, Yongbongdong 300, Kwangju, 500-757, Korea
Abstract
A method which we describe as the “successive cracking method” for measuring residual stresses in a circular ring is presented. In this method, the residual stresses are evaluated using a fracture mechanics approach. The strains measured at a point on the outer edge of the ring as a crack is introduced and extended from the edge are used to deduce the residual stress distribution in the uncracked ring. Finite element analysis is carried out to examine the validity of the theoretical derivation. Experiments to measure the residual stresses in a steel ring specimen are done by the successive cracking method. For comparison purposes, the experimental results using the sectioning method are presented as well. The successive cracking method is shown to be valid, simple, and effective for measuring the two-dimensional residual stress distribution in an axisymmetric member.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference25 articles.
1. Aamodt
B.
, and BerganP. G., 1976, “On the Principle of Superposition for Stress Intensity Factors,” Eng. Fracture Mechanics, Vol. 8, pp. 437–440.
2. ABAQUS, 1992, User’s Manual Version 5.2, Hibbit, Karlsson & Sorensen Inc., Providence, RI 02906.
3. ASTM Standard, 1984, Annual Book, Vol. 03.01, E647-83. pp. 711–731.
4. Buekner
H. F.
, 1970, “A Noble Principle for the Computation of Stress Intensity Factors,” Z. Angewndte Mathemat. Median., Vol. 50, No. 9, pp. 529–546.
5. Cheng
W.
, and FinnieI., 1985, “A Method for Measurement of Axisymmetric Residual Stresses in Circumferentially Welded Thin-Walled Cylinders,” ASME JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY, Vol. 107, pp. 181–185.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Effect of Geometry and Materials on Residual Stress Measurement in Thin Films by Using the Focused Ion Beam;Journal of Engineering Materials and Technology;2004-10-01
2. Numerical Analysis of the Effect of Machining on the Depth of Yield, Maximum Firing Pressure and Residual Stress Profile in an Autofrettaged Gun Tube;Journal of Pressure Vessel Technology;2003-08-01
3. Discussion: “Measurement of Residual Stresses in a Circular Ring Using the Successive Cracking Method” (Kang, K. J., and Seol, S. Y., 1996, ASME J. Eng. Mater. Technol., 118, pp. 217–223);Journal of Engineering Materials and Technology;1997-01-01
4. Closure to “Discussion of ‘Measurement of Residual Stresses in a Circular Ring Using the Successive Cracking Method’” (1997, ASME J. Eng. Mater. Technol., 119, p. 116);Journal of Engineering Materials and Technology;1997-01-01