Thermoacoustic Characterization of a Premixed Multi Jet Burner for Hydrogen and Natural Gas Combustion

Abstract

Abstract In this study, the acoustics and flame dynamics of a prototype multi jet burner with 19 individual mixing tubes for operation with pure hydrogen and pure natural gas are experimentally investigated. The burner transfer matrix (BTM) of the jet burner is determined from experimental data and acoustic network modeling, showing very good agreement. The burner plate and attached mixing tubes are shown to be well approximated with an acoustic model of a perforated plate with bias flow. Accordingly, the burner is found to feature a high level of acoustic damping. A comparison of the flame dynamics of the two fuels considering mass flow and equivalence ratio variation reveals that the flame transfer functions (FTFs) are dominated by a convective mechanism originating from the upstream end of the mixing tubes where the fuel is injected. Consequently, these are most likely fluctuations in the equivalence ratio that feature two characteristic time scales: the convection time in the mixing tubes and along the flame. The overall qualitative shape of the FTFs for hydrogen and natural gas at equal thermal power is found to be similar, with the dynamics of the natural gas flames being more responsive to acoustic excitation, as evident in generally higher gain values. Distinctly less pronounced phase decays are observed for hydrogen compared to natural gas operation. Moreover, the FTFs for H2 are found to change only slightly across the considered range of equivalence ratios. At the same time, we observe only small changes in the corresponding static flame shapes. These observations are consistent with the hypothesis of a dominant convective mechanism. In conclusion, the study provides valuable information on the acoustics and flame dynamics of multi jet burners for flexible fuel operation.