In Situ Chip Stress Extractions for LFBGA Packages Through Piezoresistive Sensors

Abstract

Piezoresistive sensors have been demonstrated to be an accurate and efficient tool for stress measurements on chip surfaces inside microelectronic packaging. In this work, test chips with piezoresistive stress sensors, diode temperature sensors as well as heaters were first designed, fabricated, and calibrated. We next packaged the test chips into low profile, fine pitch ball grid array (LFBGA) packaging with 196 balls and measured the stresses on chip surfaces inside the packaging. After measuring the packaging induced stress as well as the stress under stable environmental temperature rises, it was found that compressive stresses were obtained at room temperature, and the stresses were relaxed as temperature went up at a rate between 0.45 MPa/°C and 0.60 MPa/°C. For thermo-stress experiments, the temperatures on chip surfaces at different power levels were measured, and compressive chip stresses were first extracted. As the chip power increased, the compressive stresses became tensions. Since the LFBGA structure is thinner with higher packaging efficiency, different results from our earlier plastic quad flat package stress measurements were observed and discussed. In addition, the final comparisons between the experimental data and the finite element simulations show good consistency.