Affiliation:
1. School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus , Nibong Tebal, Penang 14300, Malaysia
Abstract
Abstract
This paper investigates voiding issues in the underfilling process of ball grid array (BGA) chip packages under various parameter settings such as chip conveyor speed, valve pressure, temperature, and dispense pattern complicate. The study identifies valve pressure as the primary cause of voiding in large quantity BGA chips, achieving 88.9% in accuracy, supported with the deformation of the valve nozzle. Additionally, the findings reveal that racing effects occurs due to asymmetry of the solder ball array arrangement with percentage difference between the TSAM BGA chips experiments and its simulation counterparts in the range of 0.089–3.65%.
Reference31 articles.
1. Underfill Flow in Flip-Chip Encapsulation Process: A Review;ASME J. Electron. Packag.,2021
2. Effect of ILU Dispensing Types for Different Solder Bump Arrangements on CUF Encapsulation Process,2016
3. A Study on the Effect of Epoxy Molding Compound (EMC) Rheology During Encapsulation of stacked-CHIP Scale Packages (S-CSP);J. Reinf. Plast. Compos.,2009
4. Comparing the Impacts of the Capillary and the Molded Underfill Process on the Reliability of the Flip-Chip BGA;IEEE Trans. Compon. Package. Technol.,2008
5. Three-Dimensional Modeling of Mold Filling in Microelectronics Encapsulation Process;IEEE Trans. Compon. Packag. Technol.,2004