Affiliation:
1. Department of Mechanical Engineering, State University of New York at Binghamton, P.O. Box 6000, Binghamton, NY 13902
Abstract
The ever increasing power density in modern semiconductor devices requires heat dissipation solution such as heat sink to remove heat away from the device. A compressive loading is usually applied to reduce the interfacial thermal resistance between package and heat sink. In this paper, both experimental approaches and numerical modeling were employed to study the effect of compressive loading on the interconnect reliability under thermal cycling conditions. A special loading fixture which simulated the heat sink was designed to apply compressive loading to the package. The JEDEC standard thermal cycle tests were performed and the resistance of daisy chained circuits was in situ measured. The time to crack initiation and time to permanent failure were identified separately based on in situ resistance measurement results. Failure analysis has been performed to identify the failure modes of solder joint with and without the presence of compressive loading. A finite element based thermal-fatigue life prediction model for SAC305 solder joint under compressive loading was also developed to understand the thermal-fatigue crack behaviors of solder joint and successfully validated with the experimental results.
Subject
Electrical and Electronic Engineering,Computer Science Applications,Mechanics of Materials,Electronic, Optical and Magnetic Materials
Reference17 articles.
1. Dynamic Responses of PCB Under Product-Level Free Drop Impact;Microelectron. Reliab.,2010
2. Yu, D., Kwak, J. B., and Park, S. B., 2009, “Effect of Shield-Can Design on Dynamic Responses of PCB Under Board Level Drop Impact,” Proceedings of ASME-IMECE 2009, ASME Paper No. IMECE2009-12639, pp. 305–310.10.1115/IMECE2009-12639
3. Effect of Shield-Can on Dynamic Response of Board-Level Assembly;J. Electron. Packag.,2012
4. High-Cycle Fatigue Life Prediction of Lead-Free Solder Joints Under Random Vibration Loading;Microelectron. Reliab.,2011
5. Yu, D., Abdullah, A.-Y., Park, S. B., and Chung, S., “Finite Element Based Fatigue Life Prediction for Electronic Components Under Random Vibration Loading,” Proceedings of the 60th Electronic Components and Technology Conference, Las Vegas, NV, June 1–4, pp. 188–193.10.1109/ECTC.2010.5490900
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献