Effects of Plate Structure and Nozzle Diameter on Hydraulic Performance of Fixed Spray Plate Sprinklers at Low Working Pressures

Abstract

HighlightsThe hydraulic performance of fixed spray plate sprinklers (FSPS) was evaluated at low working pressures.The effects of geometric structure on the hydraulic performance of FSPS were studied.A model was developed for estimating the application depth and uniformity of FSPS under a linear-move system.The recommended values of the most effective sprinkler combination spacing for FSPS are given.Abstract. Reducing the working pressure of sprinklers can effectively reduce the energy consumption of sprinkler irrigation systems. Fixed spray plate sprinklers (FSPS) have a simple structure, and their working pressure has potential to be reduced to 40 kPa. To evaluate the hydraulic performance of FSPS at low pressure, an experiment was conducted to investigate the effects of working pressure, plate structure, and nozzle diameter on sprinkler flow rate, wetted radius, and water application distribution. Two plates (FSPSB and FSPSY) and five nozzles were used in the tests. The cumulative water application depth and irrigation uniformity coefficient were calculated under a linear-move system. The results show that sprinklers with larger nozzle diameters and higher working pressures produce greater coefficients of discharge. The wetted radius gradually increases with the increase in working pressure and nozzle diameter. Two empirical equations for estimating the wetted radius of the two plates are proposed. The FSPSB has a concave trajectory structure that produces a longer wetted radius than the FSPSY, which has a flat trajectory structure. Along the wetted radius, the water application rate increases and then decreases, with a peak value at a certain distance. For the FSPSB, the peak rate of water application decreases with increasing working pressure. However, the FSPSY shows the opposite trend, with the maximum peak value occurring at the highest working pressure of 250 kPa. The water distribution for a single FSPSB sprinkler is discrete due to the greater water dispersal caused by the deeper grooves in the plate. In contrast, a single FSPSY sprinkler provides a more uniform water distribution. The irrigation uniformity of the FSPSY is higher than that of the FSPSB. The recommended values for the most effective sprinkler combination spacings for FSPSB and FSPSY are given in this article. The results may be useful for selecting appropriate sprinklers in hydraulic design procedures. Keywords: Cumulative spray water depth, Irrigation uniformity, Sprinkler irrigation, Water distribution, Working condition.