Comparisons of Spray Characteristics between Non-circular and Circular Nozzles with Rotating Sprinklers

Abstract

HighlightsExperiments were conducted to investigate the hydraulic performance of the solid-set rotating sprinkler.The effects of nozzle shape and working pressure on the droplet characteristics and kinetic energy of the rotating sprinkler were analyzed.The circular nozzle has a large wetting radius and large droplet size.Use of a non-circular nozzle could result in higher irrigation uniformity and lower kinetic energy imparted to the soil surface by water droplets under low working pressures.Abstract. Reducing the working pressure of sprinklers can effectively reduce sprinkler irrigation energy requirements. However, the reduction in working pressure and variation of nozzle shape inevitably lead to changes in the hydraulic performance of the sprinkler. To evaluate the spray characteristics of selected non-circular (the shape of the nozzle opening was asymmetric) and circular nozzles at low pressure, experiments were conducted to investigate the effects of working pressure, nozzle shape, and nozzle diameter on flow rate, radius of throw, water application rate, droplet size, droplet velocity of the rotating sprinkler, and kinetic energy of the water droplets impacting on the soil surface. The coefficients of irrigation uniformity were calculated for the non-circular and circular nozzles under different rectangular sprinkler spacing and working pressures. The results show that the flow rates of the non-circular and circular nozzles were equal under the same working pressure and with the same nozzle size, while the throw radius of the circular nozzle was longer than that of the non-circular nozzle. The circular nozzle produced a larger droplet size than the non-circular nozzle did. Since the droplet size and kinetic energy per unit droplet volume increased along the radius of throw, and the peak water application rate of the circular nozzle was located near the perimeter of the radius of throw, the peak specific power impact on the soil surface by the water droplets of the circular nozzle was greaterspecifically, 1.26 to 1.97 times that of the non-circular nozzle. With the increase in working pressure, the peak values of specific power and water application rate decreased. The irrigation uniformity coefficients of the non-circular and circular nozzles were more than 85% within the recommended pressure range of the manufacturer when the sprinkler spacing was less than 11 m. It was easier to obtain higher irrigation uniformity and lower impact kinetic energy under low working pressure when using a non-circular nozzle. Keywords: Application rate, Irrigation uniformity, Kinetic energy, Sprinkler irrigation, Working condition.