Modelling the effect of tufted yarns in composite T-joints-Reference-Cited by-同舟云学术

Modelling the effect of tufted yarns in composite T-joints

Published:2016-12 Issue:4 Volume:169 Page:158-170
ISSN:1755-0777
Container-title:Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics
language:en
Short-container-title:Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics

Author:

Wang Ying¹,Soutis Constantinos¹²

Affiliation:

1. School of Materials, University of Manchester, Manchester, UK

2. Aerospace Research Institute, University of Manchester, Manchester, UK (corresponding author: )

Abstract

This paper presents a finite-element (FE) simulation of the mechanical response of a composite T-joint subjected to tensile (pull-out) loading. The FE model includes an analysis of the effect of tufted yarns and interlaminar properties on the ultimate load to failure and a comparison between the full and strip FE model. The FE results show that the ultimate load to failure increases when the tufted yarns are introduced. The tufted configuration increases the deflection capacity of the T-joint, and therefore more energy is required to cause ultimate failure. The FE prediction was validated using experimental data for E-glass fibre/epoxy T-joints.

Publisher

Thomas Telford Ltd.

Subject

Mechanics of Materials,Civil and Structural Engineering

Link

https://www.icevirtuallibrary.com/doi/pdf/10.1680/jencm.16.00002

Reference26 articles.

1. Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues

2. On the delamination and debond suppression in structural joints by Z-fibre pinning

3. Finite element modelling of z-pinned composite T-joints

4. Strength improvement to composite T-joints under bending through bio-inspired design

Cited by 7 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Kompozit levhaların mekanik özelliklerindeki değişkenliği üzerinde üretim prosesi ve malzeme parametrelerinin etkisinin incelenmesi;Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi;2024-07-15

2. Effect of crossing warp architecture on tear strength of 3D orthogonal woven T-shaped reinforcements;Textile Research Journal;2024-01-31

3. Filler materials in composite out-of-plane joints – A review;Composite Structures;2019-01

4. A Finite Element and Experimental Analysis of Composite T-Joints Used in Wind Turbine Blades;Applied Composite Materials;2018-06-18

5. Fatigue behaviour of fibre-reinforced composite T-joints;MATEC Web of Conferences;2018