Affiliation:
1. Marelli Mako Turkey, Bursa, Turkey
2. Mechanical Engineering, Bursa Uludag University, Bursa, Turkey
Abstract
Printed circuit boards (PCBs) have a sandwich structure consisting of an insulating composite layer between conductive copper layers. The material property of the PCB cannot be defined as isotropic due to this special structure. In addition, variables such as the types of hundreds of components on the PCB, material properties, types of solder leads, and thickness of the sandwich structure make it very difficult to create and verify the finite element model of the PCB. The aim of this study is to perform a sensitivity analysis by defining the strain values measured from three points on the PCB with the help of strain gauges as responses and to find the best design variables that correlate with the physical test. The effect of each design parameter on the response function was examined, and the results were obtained with statistical data. The objective function and constraints were determined to find the best correlated finite element model with a physical test, and the best design was obtained by running the optimization model. In this way, the finite element model was calibrated by taking into account the thermal stresses resulting from the heat generated by the transistors and by using optimization methods.
Subject
Pharmacology (medical),Complementary and alternative medicine,Pharmaceutical Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献