Field trials of a methodology for locomotive brake testing to assess friction enhancement in the wheel/rail interface using a representative leaf layer

Abstract

There are two options for testing the performance of rail vehicles and the application of material to the wheel/rail interface to influence friction, and therefore braking performance, in a low adhesion environment: laboratory work which is not representative of conditions in the field, and expensive track tests using fully instrumented modern vehicles largely using low adhesion simulants that are not representative of those that occur in the real world and usually applied over great lengths of track. This paper presents a third option: low-cost track tests. We determined the minimum of equipment and resources needed to produce low adhesion using a method more representative on Autumn conditions on rail and monitor the performance of rail vehicles when braking on it. This was mainly targeted at use for testing products applied to the wheel/rail interface to enhance traction, hence the need for real low adhesion causes. We present the methodology that we have developed, and some initial results showing that using it we can generate a low adhesion scenario when braking from 10 mph. This can be used to develop mitigation solutions for low adhesion in a more cost effective manner.