Effects of weathering on failure pressure of filament-wound GFRP thermoset pipes-Reference-Cited by-同舟云学术

Effects of weathering on failure pressure of filament-wound GFRP thermoset pipes

Published:2010-10-27 Issue:6 Volume:45 Page:645-655
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Al-Sulaiman F.¹,Khan Z.²,Merah N.³,Kounain M.A.⁴,Mehdi M.⁵

Affiliation:

1. Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.

2. Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia.,

3. Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

4. Dhahran Techno Valley, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

5. Consulting Services Department, Saudi Aramco, Dhahran, Saudi Arabia

Abstract

Burst tests have been performed on the glass fiber-reinforced (GFR) thermoset pipes before and after exposure to natural and accelerated environmental conditions. The main objective of this study was to explore the effects of long-term natural outdoor and artificial accelerated environmental conditions on the burst resistance of the vinyl-based and epoxy-based GFR filament wound thermoset pipes which are targeted for use in crude oil transportation. The pipes were exposed to natural outdoor and accelerated dry heat conditions. The results show that these environments did not produce any noticeable degradation in the hydrostatic burst resistance of the pipes up to 24 months of natural exposure and up to 10,000 h of dry heat exposure.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0021998310377933

Reference15 articles.

1. Burst Tests of Filament-wound Graphite-epoxy Tubes

2. Damage, deformation and residual burst strength of filament-wound composite tubes subjected to impact or quasi-static indentation

3. Fracture of glass-reinforced plastic pipes of mixed wall construction under pressure loading

4. Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber

5. Strength of filament wound GRP pipes with surface crack

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Application of Polymer Matrix Composites in Large Power Transformer Tanks;IEEE Transactions on Power Delivery;2022-10

2. Long-Term Natural Aging Effects on Flexural Properties of E-Glass/Vinyl Ester Filament-Wound Pipes;Arabian Journal for Science and Engineering;2022-07-27

3. Effect of hygrothermal ageing on the compressive behavior of glass fiber reinforced IPN composite pipes;Materials Today: Proceedings;2021

4. Experimental analysis of compressive behavior of E-Glass fiber reinforced IPN (vinyl ester/polyurethane) composite pipes;IOP Conference Series: Materials Science and Engineering;2020-12-01

5. Characterisation of C-shape pultruded fibre reinforced polymer for bridge structures;SN Applied Sciences;2019-06-10