Fabrication and anti-oxidation properties of Al/Ti-6Al-4V bimetallic clad-sheet by multi-pass friction stir welding-Reference-Cited by-同舟云学术

Fabrication and anti-oxidation properties of Al/Ti-6Al-4V bimetallic clad-sheet by multi-pass friction stir welding

Published:2014-07-11 Issue:6 Volume:229 Page:1078-1082
ISSN:0954-4054
Container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Author:

Li Bo¹²,Shen Yifu²,Luo Lei²,Hu Weiye³

Affiliation:

1. Shanghai Institute of Special Equipment Inspection and Technical Research, Shanghai, P.R. China

2. College of Material Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, P.R. China

3. Technology Research Institute, China Aerospace Science and Industry Corporation (CASIC), Nanjing Chenguang Group Co., Ltd (NCGC), Nanjing, P.R. China

Abstract

Bimetallic Al/Ti-6Al-4V clad sheets were fabricated via a novel technical route, mainly by multi-pass friction stir lap welding method. Preliminary investigations on process principles, clad-sheet formability, bonding property, and interlayer structure evolutions were performed. The anti-oxidation performance of Al/Ti-6Al-4V specimens was particularly researched, considering our focus on the protection role of exterior Al-cladding. More fully Ti/Al inter-diffusion and phase-stratification occurred within the interlayer after oxidation test. The Ti/Al interlayer forming mechanisms by friction stir lap welding was elucidated.

Publisher

SAGE Publications

Subject

Industrial and Manufacturing Engineering,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1177/0954405414535583

Reference10 articles.

1. Low-temperature plasma nitriding of titanium layer on Ti/Al clad sheet

2. A novel approach to diffusion bonding of copper to stainless steel

3. Theoretical and experimental formability study of two-layer metallic sheet (Al1100/St12)

4. Interfacial microstructure and mechanical properties of Cu/Al clad sheet fabricated by asymmetrical roll bonding and annealing

5. Investigation of cold rolling influence on the mechanical properties of explosive-welded Al/Cu bimetal

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Dissimilar friction stir butt welding of AA7075-T6 Al and Ti6Al4V Ti plates: Mechanical and metallurgical analysis;The International Journal of Advanced Manufacturing Technology;2023-08-21

2. Dissimilar Joining of Al/Mg Light Metals by Centrifugal Compound Casting Process;International Journal of Metalcasting;2022-06-28

3. Multi-Pass Friction Stir Lap Welding of AA 6061-T6: Implication of Tool Pin Overlapping on Microstructure and Mechanical Properties of Joints;Soldagem & Inspeção;2022

4. Solid-state joining of aluminum to titanium: A review;Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications;2021-05-22

5. In-situ observation of crack initiation and propagation in Ti/Al composite laminates during tensile test;Journal of Alloys and Compounds;2017-07