Influence of nanoparticle fillers content on the bearing strength behavior of glass fiber-reinforced epoxy composites pin joints-Reference-Cited by-同舟云学术

Influence of nanoparticle fillers content on the bearing strength behavior of glass fiber-reinforced epoxy composites pin joints

Published:2015-09-29 Issue:8 Volume:231 Page:641-656
ISSN:1464-4207
Container-title:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

Author:

Sekhon Manjeet¹,Saini JS¹,Singla Gaurav¹,Bhunia H²

Affiliation:

1. Mechanical Engineering Department, Thapar University, Patiala, India

2. Chemical Engineering Department, Thapar University, Patiala, India

Abstract

The objective of the present study is to investigate and compare the strength of single pin joints made with glass fiber-reinforced epoxy laminates containing two different nanoparticles, i.e. nanoclay and nano TiO2, with bare composites. The analysis has been done both experimentally and numerically. Single-hole pin-loaded specimens were tested for their tensile strength and the distance from the free edge of the specimen to the diameter of the first hole (E/D) ratio, width of the specimen to the diameter of the holes (W/D) ratio were evaluated. The influence of these geometry parameters on the strength of the pin-loaded composites was investigated. It was found that the bearing strength of pin joints increased with the addition of nanoclay as compared to that of nano TiO2.

Publisher

SAGE Publications

Subject

Mechanical Engineering,General Materials Science

Link

http://journals.sagepub.com/doi/pdf/10.1177/1464420715607556

Reference24 articles.

1. Failure analysis of multi-pin joints in glass fibre/epoxy composite laminates

2. An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates

3. A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate

4. The effects of geometric parameters on the failure strength for pin-loaded multi-directional fiber-glass reinforced epoxy laminate

5. The strength of pinned joints in laminated composites

Cited by 14 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Evaluation of graphene nanoplatelets addition and machining methods on the hole quality and bearing strength of glass and carbon fibre reinforced epoxy laminates;Journal of Manufacturing Processes;2024-04

2. Hygrothermal effect on strength of thermally cured glass epoxy nanocomposite made joints;Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science;2023-04-03

3. An experimental study on the bearing strength of pin-loaded ceramic particles filled woven glass/epoxy composites;Journal of Composite Materials;2022-07-11

4. A critical review on damage modeling and failure analysis of pin joints in fiber reinforced composite laminates;Polymers and Polymer Composites;2022-01

5. Enhancement of the in-plane and pin-load bearing behavior of a quasi-isotropic carbon fiber/epoxy matrix multi-scale laminate by modifying the fiber-matrix interphase using graphene nanoplatelets;Journal of Materials Research and Technology;2020-11