Obtaining phthalate substituted post-consumer polyethylene terephthalate and its isothermal crystallization

Abstract

Objects. Due to the polymer waste accumulation, the search for new directions for their utilization is urgent. Chemical recycling methods are of considerable interest, which allow one to obtain the original monomers or change the compositions of the copolymers. From the point of view of building a circular economy, a promising material is polyethylene terephthalate (PET), on the basis of which amorphous copolyesters can be obtained. The study aimed to analyze the simultaneous glycolysis and interchain exchange reactions of PET in the presence of the oligoethylene phthalate modifier with hydroxyl end groups and the study of isothermal crystallization of poly(ethylene phthalate-co-terephthalates) with different phthalate contents obtained in this way.Methods. Oligoethylene phthalate is synthesized by polycondensation. Poly(ethylene phthalateco-terephthalates) were obtained by the interaction of post-consumer PET with oligoethylene phthalate. The composition of the oligomer and copolymers was confirmed using Fourier-transform infrared spectroscopy, thermal characteristics and crystallization half-times were determined by differential scanning calorimetry.Results. In this work, the use of the post-consumer PET chemical recycling process, aimed at obtaining copolyesters under the influence of small modifier amounts was proposed. The process consisted in carrying out the combined interchain exchange and degradation with a complex oligoester different from PET. Poly(ethylene phthalate-co-terephthalate) copolymers were obtained via reaction of post-consumer poly(ethylene terephthalate) flakes and synthesized oligoethylene phthalate resin in the melt phase in the absence of catalyst. The effect of phthalate concentration in polymer on the isothermal crystallization of phthalate substituted poly(ethylene terephthalate) was estimated.Conclusions. The hypothesis about the possibility of using an oligoester modifier to obtain the PET-based copolymer at the high rate and without reducing the molecular weight to values characteristic of a monomer or oligomer has been confirmed. The process can be used to obtain random copolyesters based on post-consumer PET. The phthalate unit concentration increase is followed by decrease in the glass transition temperature, temperature and heat of fusion, and increase in crystallization half-times. Phthalate has a better ability to retard PET crystallization than 2-methyl-1,3-propanediol or furandicarboxylic acid, but is inferior to some of the other modifiers known.