Abstract
Abstract. Earthquake site response is an essential part of seismic hazard assessment, especially in densely populated areas. The shallow geology of the Netherlands consists of a very heterogeneous soft sediment cover, which has a strong effect on the amplitude of ground shaking. Even though the Netherlands is a low- to moderate-seismicity area, the seismic risk cannot be neglected, in particular, because shallow induced earthquakes occur. The aim of this study is to establish a nationwide site-response zonation by combining 3D lithostratigraphic models and earthquake and ambient vibration recordings. As a first step, we constrain the parameters (velocity contrast and shear-wave velocity) that are indicative of ground motion amplification in the Groningen area. For this, we compare ambient vibration and earthquake recordings using the horizontal-to-vertical spectral ratio (HVSR) method, borehole empirical transfer functions (ETFs), and amplification factors (AFs). This enables us to define an empirical relationship between the amplification measured from earthquakes by using the ETF and AF and the amplification estimated from ambient vibrations by using the HVSR. With this, we show that the HVSR can be used as a first proxy for site response. Subsequently, HVSR curves throughout the Netherlands are estimated. The HVSR amplitude characteristics largely coincide with the in situ lithostratigraphic sequences and the presence of a strong velocity contrast in the near surface. Next, sediment profiles representing the Dutch shallow subsurface are categorised into five classes, where each class represents a level of expected amplification. The mean amplification for each class, and its variability, is quantified using 66 sites with measured earthquake amplification (ETF and AF) and 115 sites with HVSR curves. The site-response (amplification) zonation map for the Netherlands is designed by transforming geological 3D grid cell models into the five classes, and an AF is assigned to most of the classes. This site-response assessment, presented on a nationwide scale, is important for a first identification of regions with increased seismic hazard potential, for example at locations with mining or geothermal energy activities.
Subject
General Earth and Planetary Sciences
Reference80 articles.
1. Akkar, S., Sandıkkaya, M., and Bommer, J. J.: Empirical ground-motion models
for point-and extended-source crustal earthquake scenarios in Europe and
the Middle East, B. Earthq. Eng., 12, 359–387, 2014. a
2. Albarello, D. and Lunedei, E.: Combining horizontal ambient vibration
components for H/V spectral ratio estimates, Geophys. J. Int., 194, 936–951, 2013. a
3. Bard, P.-Y.: Microtremor measurements: a tool for site effect estimation, in:
Proceeding of the Second International Symposium on the Effects of Surface
Geology on Seismic Motion, AA Balkema, Rotterdam, 3, 1251–1279,
1998. a
4. Bard, P.-Y.: Extracting information from ambient seismic noise: the SESAME
project (Site EffectS assessment using AMbient Excitations),
European Project EVG1-CT-2000-00026 SESAME, 2002. a
5. Bard, P.-Y., Campillo, M., Chavez-Garcia, F., and Sanchez-Sesma, F.: The
Mexico earthquake of September 19, 1985 – A theoretical investigation of
large-and small-scale amplification effects in the Mexico City Valley,
Earthq. Spectra, 4, 609–633, 1988. a
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献