Author:
Razzokov T.X.,Toshtemirov S.J.,Latipov Sh.A.
Abstract
The purpose of the study is to study and analyze the physical and mechanical properties of the seed pile of fodder crops. The results of determining the physico-mechanical properties of the seed pile of fodder crops obtained in the combing clover plants with a comb of the combing drum of the harvesting machine are presented. The basic principles and methods of classical mechanics, mathematical analysis, and statistics were used in this study. It was found that the stiffness of the stems of the seed pile at a humidity of 40-60% is in the range of 0.07-0.008 N / m2. At the same time, with a moisture content of 35-65%, its bulk mass is 80-185 kg/ m3, respectively. The minimum value of the angle of the natural slope of the clover seed pile is 48o, and its maximum value reaches up to 90o; the value of the static friction coefficient at a humidity of 40-60% is within 0.98-1.02, and the value of the dynamic friction coefficient is within 0.5-0.7. The pile's temperature is directly proportional to the storage time; during self-heating, the appearance of the pile gradually changes depending on the storage time and temperature duration.
Reference37 articles.
1. Mamatov F., Mirzaev B., Toshtemirov S., Hamroyev О., Razzaqov T. and Avazov I., Study on the development of a machine to prepare the soil for cotton sowing on ridges, IOP Conf. Series: Earth and Environmental Science 939 (2021)
2. Technological process of uniform distribution of fertilizers over the width of the coulter
3. Parameters of the comb-forming machine with elastic rods
4. Aldoshin N., Mamatov F., Ismailov I., Ergashov G., Development of combined tillage tool for melon cultivation, In Proceedings: 19th International Conference on Engineering for Rural development, Jelgava, 19, 2020
5. Kovalev V.G. Uborka klevera lugovogo na semena metodom ochesa rastenij na kornju. Diss … .kand.tehn.nauk.- Gorki, 1986. – 216c.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献