Author:
Biryukov Vladimir,Yakubovsky Anton
Abstract
The paper presents the results of micromechanical and tribotechnical tests of samples of polytetrafluoroethylene, radiation-modified (PTFE – RM according to modes A and B), coked in comparison with the PTFE standard (Fluoroplast -F4). The influence of the surface roughness of a 40Kh steel counter-tile on the coefficients of friction against time at a constant sliding speed is considered. Micromechanical tests were carried out using the method of instrumental indentation with a triangular Berkovich diamond pyramid. Tribotechnical tests were performed on a friction machine with a vertical axis of rotation of the spindle according to the scheme “the end of the sample of the fluoropolymer disk is the end of the counter-flange of the annular sleeve (steel 40Kh)” without lubrication and when the friction pair is lubricated with MGE-10A hydraulic oil. It was found that during friction without lubrication, PTFE samples had the maximum friction coefficients, and F4K20 samples had the minimum friction coefficients when working with 40X steel counter-tiles treated with P180 sandpaper. PTFE-RM (A) samples had the best wear resistance, followed by decreasing F4K20, PTFE – RM (B) and PTFE under friction without lubrication. In the presence of lubricant, the samples of the PTFE standard were inferior in wear resistance to the F4K20 samples, but were 5-7% better than the samples of PTFE-RM (B) and (A), respectively.