Author:
Zhang Zhenxue,Li Xiaoying,Dong Hanshan,Jestin Simon,Termine Stefania,Trompeta Aikaterini-Flora,Araújo Andreia,Santos Raquel M.,Charitidis Costas
Abstract
In this work, the carbon fibres (CFs) surfaces were modified via sizing and coated with a very thin layer of a complex formulation including carbon nanotubes (CNTs). A push-out method was developed based on nanoindentation to assess the interfacial shear strength of the fibre/matrix. The mechanical properties such as indentation hardness, reduced modulus, indentation displacement and indentation creep of the composite were evaluated by means of the Oliver-Pharr method. The critical load of different composites was measured and the interfacial shear strength (IFSS) was calculated to compare the effect of the CNTs concentration in the sizing solution. Wettability evaluation of the sized fibres was performed prior to nanoindentation to investigate the adhesion of the resin. After push-out testing, characterisation by optical microscopy/SEM was carried out to ratify the results. It was found sizing with a small amount of evenly distributed nano-inclusion on CFs can increase the interfacial shear strength but large amount of sizing could lead to a decrease of the interfacial bonding due to the agglomeration of CNTs on CFs.
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献