Author:
Matiukh Serhii,Dykha Aleksandr,Holenko Kostyantyn,Łukasiewicz Marcin
Abstract
Studying the behavior of control cable fittings (actually a pipe-type part) during radial crimping for fixation on the pipeline is a difficult task since it is necessary to control the presence of obvious plastic deformations: on the one hand, insufficient crimping can cause the fitting to break off from the cable conduit (axial loads over 100 kgf), and on other – the excessive crimping can block the operation of the cable (the core will jam). The selection of the optimal ratio of the fitting diameter and its wall thickness at different load values is the topic of a multi-parameter problem, and one of the ways of solving it will be presented in our research. To evaluate the nonlinear behavior of the Structural Steel NL Ansys material will be used Bilinear Isotropic Hardening stress-strain model with further interpolation of the Tangent Angle Coefficient (TAC) which is suggested as a new calculation parameter of pipe stress estimation.
Reference11 articles.
1. Grosu S., Carlos R. G., Grosu V., Vanderborght B., Lefeber D., Evaluation and Analysis of Push-Pull Cable Actuation System Used for Powered Orthoses, Frontiers in Robotics and AI, 5 (2018)
2. Carlos R. G., Grosu V., Grosu S., Leu A., Ristic-Durrant D., Vanderborght B., Lefeber D.. Torque Control of a Push-Pull Cable Driven Powered Orthosis for the CORBYS Platform, (2015)
3. Goodman J., Beckers T., Colombo L., Geometric Control for Load Transportation With Quadrotor UAVs by Elastic Cables. IEEE Transactions on Control Systems Technology, pp. 1–15 (2023)
4. Vibration Control of Flexible Manipulators by Active Cable Tension
5. Zhongbin L., Guanghui L., Fangyu L., Chuan W., Yaguang T., Jufang L., Zhongfei Y., Xiaohui L., Yuntao S., Bo Y., Study on the fastening characteristics of preformed helical fittings considering the surface effect of transmission lines, Scientific Reports, 13, (2023)