Affiliation:
1. Northeastern University
Abstract
cBN/SiAlON composites were prepared by spark plasma sintering (SPS) method using Si3N4, AlN, Al2O3,cBN and Y2O3 powders as raw materials. The sintering process is at the temperature of 1500°C holding for 5 min. Effect of the Y2O3 content on phase composition, microstructure, bulk density, hardness and fracture toughness of the cBN/SiAlON composite was investigated. The experimental results showed that when the Y2O3 content was 0.2 wt. % the bulk density and fracture toughness of the composite had the maximum values of 3.0 g/cm3 and KIC = 5.7 MPa∙m1/2, respectively. The cBN/SiAlON composite with 0.8 wt. % Y2O3 addition got the maximum hardness of 16.4 GPa.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献