Affiliation:
1. Chongqing University of Technology
Abstract
The joining process of SiCp/A356 composites is investigated. The two substrates are heated up to the melt temperature of Zn27Al filler metal by a resistance heating plate. At the time, a stirrer is introduced into the liquid weld seam in order to mix filler metal and two sides of substrates into a single uniform joint. After stirring, specimens are sectioned for the analysis of macro- and micro-structures along the weld region. The research shows that two typical joint interfaces with oxide film and without one were found. So, oxide film on the substrate wasn’t completely disrupted during stirring brazing at 500°C.And, the tensile strength of joint is only 50MPa.
Publisher
Trans Tech Publications, Ltd.
Reference12 articles.
1. Midling, Joining of particle reinforced Al-SiC MMCs, Key Eng Mater 104-107(1995), p.355.
2. R. Klehn, T. W. Eager, Joining of 6061 aluminum matrix-ceramic particle reinforced composites, Welding Research Council Bulletin 385(1993), p.1.
3. H. Uzun, Friction stir welding of SiC particulate reinforced AA2124 aluminium alloy matrix composite, Mater Des 28 (2007), p.1440.
4. Meng Hua; Wei Guo; Hang Wai Law; John Kin Lim Ho; The International Journal of Advanced Manufacturing Technology 37 (2008), p.504.
5. Huang, JH, Wan Y, Zhao HT, Cheng DH and Zhang H: Mater. Sci. Technol. Vol. 23 (2007), p.87.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献