Study of Changes the Tool Wear of the Cutting Tool Part of Stainless Steels ELC X04Cr18Ni9Ti during Drilling-Reference-Cited by-同舟云学术

Study of Changes the Tool Wear of the Cutting Tool Part of Stainless Steels ELC X04Cr18Ni9Ti during Drilling

Published:2013-09 Issue: Volume:394 Page:228-231
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Jurko Jozef¹,Panda Anton¹

Affiliation:

1. Technical University in Košice

Abstract

The basic hypothesis of this article focuses on the study changes in the tool wear during drilling of stainless steels ELC X04Cr18Ni9Ti. The problem of drilling holes with diameter D=2 to 8 mm resides in the fact that 20 to 30% of these holes do not comply with prescribed requested requirements. This article presents the results of experiments focusing on the study of the damage process in helical drills with diameter d=8.0 mm when drilling into austenitic stainless steel ELC X04Cr18Ni9Ti. This study also includes an analysis of accompanying phenomena in the cutting zone by measuring some selected parameters.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.394.228.pdf

Reference5 articles.

1. J. Jurko, A. Panda, M. Gajdoš: Accompanying phenomena in the cutting zone machinability during turning of stainless steels. International Journal Machining and Machinability of Materials, Vol. 5, No. 4, pp.383-400, ISSN 1748-5711, (2009).

2. T. Zaborowski: Technologia kszaltowania warstwy wierzchniej. Monografia, Gorzow Wlkp., p.99, ISBN 978-83-932166-8-0, (2011).

3. J. Jurko : Verification of surface finish as an indicator of machinability in turning steel X6Cr16Ni10MoTiN, Advanced Materials Research. Vol. 291-294, pp.2987-2990, ISSN 1022-6680, (2011).

4. J. Jurko: The use of TiAlN coated carbide tool when finish drilling of stainless steel X4Cr17Ni8TiN. Applied Mechanics and Materials, Vol. 39, pp.369-374, ISSN 1660-9336, (2010).

5. I. Mrkvica, R. Konderla, M. Faktor: Turning of Inconel 718 by Cemented Carbides. Key Engineering Materials, Vol. 496, pp.138-147, ISSN 1013-9826, (2012).