Affiliation:
1. Wuhan University
2. Three Gorges University
3. National University of Ireland
Abstract
To overcome the deficiency that model experiments are unable to take accurate measurements without damaging the structure of the fine flow fields, a large eddy simulation is employed to simulate the three dimensional structure of the flow passed a pervious cubic-blunt body at Re=2.2×104. A comparative analysis have been taken qualitatively and quantitatively between the flow passed a pervious cubic-blunt body and the flow passed a non-pervious cubic-blunt body from the aspects of the flow structure (mainly including separation and reattachment), unsteady vortex shedding, distribution of static pressure and drag coefficient, etc. Therefore, characteristics of this kind of flow field are concluded and along with a better understanding of concrete effects they bring, which can give guidance to engineering.
Publisher
Trans Tech Publications, Ltd.
Reference12 articles.
1. S. Murakami. Overview of turbulence models applied in CWE-1997[A]. 2nd European & African conference on wind engineering. Genova, Italy, June 22-26, (1997).
2. A. Mochida, S. Murakami and K. Hibi. Comparison of wind tunnel experiment with numerical simulation by means of model and LES concerning turbulent flow field and gas diffusion around cubic model [A]. Proc. of Architectural Institute of Japan Annual meeting (1986).
3. S. Murakami. Comparison of various turbulence models applied to a bluff body[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1993 (46/47): 21-26.
4. M. Kato, B.E. Launder. The modeling of turbulent flow around stationary and vibrating square cylinders[A]. 9th Symp. Turbulent Shear Flows, Kyoto, (1993).
5. R. Martinuzzi, C. Tropea. The flow around a surface-mounted prismatic obstacle placed in a fully developed channel flow[J].J. Fluids Eng, 1993(115): 85-92.