A Force Torsor Analysis for a Turning Process in the Presence of Self-Excited Vibrations-Reference-Cited by-同舟云学术

A Force Torsor Analysis for a Turning Process in the Presence of Self-Excited Vibrations

Published:2011-06 Issue: Volume:62 Page:135-146
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Cahuc Olivier¹,Gerard Alain¹,Bisu Claudiu²,Ispas Constantin²

Affiliation:

1. Université de Bordeaux

2. University Politehnica of Bucarest

Abstract

A testing device in turning including, a six-component dynamometer, is used to measure the complete torsor of the cutting actions in the case of self-excited vibrations. For the tests, the insert tool used is a TNMA 160412 type carbide not coated, without chip breaker. The machined material is a chrome molybdenum 42CrMo24-type alloy. The test workpieces are cylindrical and have a diameter of 120 mm and a length of 30 mm. For the first time, we present an analysis of forces and moments for different depths of cut and different feed rates.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.62.135.pdf

Reference28 articles.

1. K. Mehdi, J-F. Rigal and D. Play, Dynamic behavior of thin wall cylindrical workpiece during the turning process, Part 2: Experimental approach and validation, J. Manuf. Sci. and Engng., vol. 24, pp.569-580, (2002).

2. S. Yaldiz and F. Ünsacar, Design, development and testing of a turning dynamometer for cutting force measurement, Mat. and Des., vol. 27, pp.839-846, (2006).

3. S. Yaldiz and F. Ünsacar, A dynamometer design for measurement the cutting forces on turning, Measurement, vol. 39, pp.80-89, (2006).

4. E. Marui, S. Ema and S. Kato, Chatter vibration of the lathe tools. Part 2 : on the mechanism of exciting energy supply, J. of Engng. for Indust., vol. 105, pp.107-113, (1983).

5. R. J. Lian, B. F. Lin and J. H. Huang, Self-organizing fuzzy control of constant cutting force in turning, Int. J. Adv. Manuf. Technol., vol. 29, pp.436-445, (2007).