Affiliation:
1. Transilvania University of Braşov
Abstract
Usage of electron beam shows the possibility of using its energy in different thermic processes. Among these, it is found the heating of mechanical products for the surface heat treatment. During the effectuated practical attempts, two types of construction steels were analyzed, namely carbon steel (OLC 45) and a low alloyed steel (41 Cr 4). The electron beam was applied on samples that were previous subjected to the heat treatment of improvement. The working parameters were chosen in order to obtain the heating of the superficial layer without melting. The samples treated as above were subjected to studies regarding the metallographic structures and the resulted hardness; also there were effectuated wear attempts. It was concluded that the use of electron beam in superficial heat treatment may also fit in practical terms.
Publisher
Trans Tech Publications, Ltd.
Reference16 articles.
1. I. Giacomelli, L. Druga, C. Samoila, D. Bot, Unconventional technologies with solid state phase tansformations, Editura Lux- Libris, (2000).
2. N.F. Garza-Montes-de-Oca, W.M. Rainforth, Wear mechanisms experienced bay work roll grade high speed steel under different environmental conditions, Wear 267, (2009), p.441–448.
3. S. Corujeira Gallo, H.Dong, On the fundamental mechanisms of active screen plasma nitriding, Vacuum 84(2), (2009),321-325.
4. M. Stoicănescu, I. Giacomelli, Unconventional heat treatment. Guidance for practical work, Transylvania University of Brasov, (2002).
5. W. E. Bryson, Heat treatment, Selection and Application of tool Steels, Hanser-Gardner Publications, Portland, USA, (2005).