Affiliation:
1. Harbin Institute of Technology
Abstract
A study has been carried out of the glass transition of fifteen asphalt-filler mastics in three different filler types. The dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) method were used. The results show that DMA method can measure asphalt Tg of asphalt-filler mastics more accurately than DSC; The glass transition temperature measured by DMA is generally higher by 20~40oC than that measured by DSC; The glass transition temperature of the asphalt-filler mastics increase with the increase of the filler volume fraction, and andesite is the most sensitive; When the volume fraction of filler is greater than 0.5, the enhance capability of glass transition temperature of asphalt-filler mastics is in the order of andesite > granite > limestone; while the volume fraction of filler is smaller than 0.2, the enhance capability is in the order of granite > limestone > andesite.
Publisher
Trans Tech Publications, Ltd.
Reference8 articles.
1. Giavarini C, Pochetti F. Characterization of Petroleum Products by DSC Analysis. Journal of Thermal Analysis and Calorimetry, 5 (1973): 83-94.
2. Ngai KL. The Glass Transition and the Glassy State, Physical Properties of Polymers, Cambridge University Press, Cambridge, UK, 2004: 72-152.
3. Y. Edwards, Y. Tasdemir, U. Isacsson. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220 – high and medium temperature performance. Construction and Building Materials. 21 (2007): 1899-(1908).
4. P. Starck, B. LÖfgren. Influence of de-icing agents on the viscoelastic properties of asphalt mastics. J Mater Sci. 42(2007): 676–685.
5. Kim YR, Little DN, Lytton RL. Use of dynamic mechanical analysis (DMA) to evaluate the fatigue and healing potential of asphalt binders in sand asphalt mixtures. Journal of the Association of Asphalt Paving Technologists. 71 (2002): 176–206.
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献