Affiliation:
1. Wuhan University of Technology
Abstract
Characteristic parameters of joint surfaces are needed in kinetic modeling of the motor frame while analyzing its vibration behavior. In this paper, research on tangential dynamic characteristics of mechanical joint surfaces in the motor frame is executed. In order to get the tangential contact stiffness and contact damping of interfaces in the motor frame under different joint conditions, an experimental method is proposed according to the structure feature and running condition of motors. A test platform is specially designed and set up. The kinetic model of test specimens (including the test joint surfaces) is derived. The experimental system is developed. The tangential dynamic contact stiffness and contact damping are identified by the experimental system. The variation rules of the contact stiffness and contact damping with changing of pre-load, exciting frequency and surface roughness are got and summarized. And the rules are consistent with the physical essence of joint surfaces.
Publisher
Trans Tech Publications, Ltd.
Reference10 articles.
1. Peng San. Application of Finite Element Method in Electric-motor Structure Design [J]. Noise and Structure Design. 2008(3): 25~26.
2. Xu Qiang. Dynamic Parameter Identification of Two-bolt Fixed Joint Element in Machine Tools[D]. Huazhong University of Science and Technology, (2009).
3. W. P. Fu, Y. M. Huang. Experimental Investigation of Dynamic Normal Characteristics of Machined Joint Surfaces[J]. Journal of Vibration and Acoustics, 2000(112): 393-398.
4. Yao Peng. Identification and Study on Dynamic Characteristic Parameters of Machine Tool Parts' Joint [D]. Northeastern University, (2005).
5. Xi Shi, Andreas A. Polycarpou. Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale[J]. Journal of Vibration and Acoustics, 2005(127): 52-60.