Affiliation:
1. School of Mechanical and Instrumental Engineering, Xi’an University of Technology, Xi’an 710048, P.R. China
2. School of Science, Northwest Institute of Architectural Engineering, Xi’an 710061, P.R. China
Abstract
This paper presents an experimental investigation on the normal dynamic characteristics of several machined joint surfaces, i.e., the varying principle of the normal dynamic stiffness and damping with exciting frequency, relative displacement and static pre-load under different joint conditions, including joint materials, mediums, machining methods and surface roughness, etc.. The joint parameters are extracted from experimental data by establishing the theoretical model of the joint surfaces, and the mechanism is analyzed qualitatively. The studied results show that, in the test range of this paper, the stiffness and damping coefficient of the joint surfaces increase with the static pre-load; the stiffness for a dry joint is independent of the exciting frequency, while the damping coefficients for both a dry and an oiled joint decrease with the exciting frequency; little relative displacement has no marked effect on the dynamic characteristics. The amount of influence of exciting frequency and static pressure is related to the joint conditions. [S0739-3717(00)00804-7]
Reference9 articles.
1. Ren, Y., and Beards, C. F., 1998, “Identification of ‘Effective’ Linear Joints Using Coupling and Joint Identification Techniques,” ASME J. Vibr. Acoust.,120, pp. 331–338.
2. Back, N., Burdekin, M., and Cowley, A., 1973, “Review of the Research on Fixed and Sliding Joints,” Proceedings of the Thirteenth International Machine Tool Design and Research Conference, pp. 87–97.
3. Yoshimura, M.
, 1979, “Computer-Aided Design Improvement of Machine Tool Structure Incorporation Joint Dynamics Data,” Ann. CIRP, 28/1, pp. 241–246.
4. Andrew, C., Cockburn, J. A., and Waring, A. E., 1967–68, “Metal Surfaces in Contact under Normal Forces: Some Dynamic Stiffness and Damping Charateristics,” Proceedings of the Institution of Mechanical Engineers, 182, Part 3K, pp. 92–100.
5. Dekoninck, C.
, 1969, “Experimental Investigation of the Normal Dynamic Stiffness of Metal Joints,” Int. J. Mach. Tool Des. Res.,9, pp. 279–292.
Cited by
48 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献