Affiliation:
1. Ufa State Aviation Technical University
2. Ufa
Abstract
The objective of the present work is to study tribological properties of multilayered wear resistant coatings on the cutting tools. Two types of coatings (TiAl)N were studied: normal monolayer coating and improved coating. The tests were conducted with cooling, and without it. During high speed machining an intensive tribo-oxidation of tool surface occurs. Formation of aluminum oxide films on the surface of cutting tool significantly changes the heat flow and heat dissipation into the chip. Conditions of the chips formation (chip thickness ratio and the shear plane angle) and the coefficient of friction on the rake face of the cutting tool have been measured during the cutting process. The results demonstrated significant improvement of tribological parameters for the cutting tools with filtered coatings.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference3 articles.
1. A. S Vereschaka, in: Efficiency of the cutting tool with wear-resistant coatings (Machinery, Moscow, 1993, 336 pp).
2. G.S. Fox-Rabinovich and other: Characteristic features of alloying HSS – based deformed compound powder materials with consideration for tool self – organization at cutting. Wear (1997).
3. Migranov M. SH., Schuster L. SH., Krioni N.K., Sholom V. YU. Cover and grease in high-temperature moving the joints and metal-working (Machinery, Moscow, 2008, 318 pp).
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献