Microstructure and Corrosion Properties of Austenitic and Duplex Stainless Steel Dissimilar Joints

Author:

Varbai Balázs,Bolyhos Patrik,Kemény Dávid Miklós,Májlinger Kornél

Abstract

In several applications duplex stainless steels should be joint welded to conventional austenitic stainless steels. In this research LDX 2101 lean duplex stainless steel sheets were welded to conventional 304 austenitic stainless steels, using gas tungsten arc welding. For the welded joints three different welding rods were used: ER 308L, ER 309LSi, and ER 2209. For gas shielding two different shielding gases were used: argon and argon +2% nitrogen. It was found that the nitrogen addition to the shielding gas promoted austenite formation in the weld metal. It was also found Schaeffler-diagram modified by Outokumpu showed a very good estimation to the ferrite content and chemical composition of the weld metal. The ferrite content estimated by the Outokumpu-diagram, showed a close correlation to measured ferrite contents, the highest error was 30%. In case of the chemical composition of the weld metal, the Cr- and Ni-contents were estimated with a maximum of 15% error. In terms of the corrosion resistance, the best pitting corrosion resistance was achieved using the 308L welding rod with argon shielding gas, where the weight loss was 1.6% after the 24 hours immersion test.

Publisher

Periodica Polytechnica Budapest University of Technology and Economics

Subject

Mechanical Engineering

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3