Modeling of Sulfation in a Flooded Lead-Acid Battery and Prediction of its Cycle Life

Abstract

A major cause of failure of a lead acid battery (LAB) is sulfation, i.e. accumulation of lead sulfate in the electrodes over repeated recharging cycles. Charging converts lead sulfate formed during discharge into active materials by reduction of Pb2+ ions. If this is controlled by mass transfer of the ions to the electrochemically active area, charging voltage can far exceed the OCV of a charged battery. Then, charge is partly consumed to electrolyse water, and for evolution of hydrogen and oxygen. It causes sulfation since regeneration of active materials will be incomplete. A mathematical model is developed incorporating resistance to mass transfer of Pb2+ ions into the rate of charge transfer reactions, changes in areas of active materials and sulfate particles, and dependence of electrodes’ resistance on content of lead sulfate. It was used to show that this mechanism of sulfation does lead to failure of flooded LABs because of increased resistance of electrodes, and to predict cycle life. Capacity fade, and increased cycle life when recharging protocol uses lower DoD are other features of degradation which the model predicts. The model also predicts the observed increase in cycle life when conducting additives are added to the negative electrode.