Observations of the Boundary Layer near Tornadoes and in Supercells Using a Mobile, Collocated, Pulsed Doppler Lidar and Radar

Abstract

Abstract During the Second Verification of the Origins of Rotation in Tornadoes Experiment (VORTEX2), in the spring of 2010, a mobile and pulsed Doppler lidar system [the Truck-Mounted Wind Observing Lidar Facility (TWOLF)] mounted on a truck along with a mobile, phased-array, X-band Doppler radar system [Mobile Weather Radar–2005 X-band, phased array (MWR-05XP)] was used to complement Doppler velocity coverage in clear air near the radar–lidar facility and to provide high-spatial-resolution vertical cross sections of the Doppler wind field in the clear-air boundary layer near and in supercells. It is thought that the magnitude and direction of vertical shear and possibly the orientation and spacing of rolls in the boundary layer have significant effects on both supercell and tornado behavior; MWR-05XP and TWOLF can provide data that can be used to measure vertical shear and detect rolls. However, there are very few detailed, time-dependent and spatially varying observations throughout the depth of the boundary layer of supercells and tornadoes. This paper discusses lidar and radar data collected in or near six supercells. Features seen by the lidar included gust fronts, horizontal convective rolls, and small-scale vortices. The lidar proved useful at detecting high-spatial-resolution, clear-air returns at close range, where the radar was incapable of doing so, thus providing a more complete picture of the boundary layer environment ahead of supercells. The lidar was especially useful in areas where there was ground-clutter contamination. When there was precipitation and probably insects, and beyond the range of the lidar, where there was no ground-clutter contamination, the radar was the more useful instrument. Suggestions are made for improving the system and its use in studying the tornado boundary layer.