Simulation of local head loss of drip-irrigation tape with integrated in-line emitters as a function of cross section

Abstract

Aim of study: To investigate how the cross section of a drip-irrigation tape affects local head loss.Area of study: The work was carried out in the laboratory of Irrigation hydraulics, College of Water Conservancy and Environment, Three Gorges University, Yichang, Hubei province.Material and methods: Tapes with six different wall thicknesses were studied experimentally to determine the relationship between cross-section deformation, wall thickness, and pressure. Based on the experimental results, we determined the factors that influence local head loss in drip-irrigation tapes by numerical simulation and dimensional analysis.Main results: The cross-sectional shape of the drip-irrigation tape varied with pressure: under low pressure, the cross section was nearly elliptical. The cross-sectional shape of the tape strongly influenced the local head loss, which was inversely proportional to the 0.867th power of the flattening coefficient of the drip irrigation tape. We expressed the local head loss of a drip-irrigation tape equipped with integrated in-line emitters by considering the deformation of the cross section. Under the conditions used in this study, when the cross section is circular, the ratio of local head loss to frictional head loss was about 10% but, when the cross section is elliptical, this ratio increased to 15%.Research highlights: The shape of the cross section of a drip-irrigation tape is nearly elliptical under low pressure. Local head loss is inversely proportional to the 0.867th power of that is the flatting coefficient of the drip-irrigation tape. Local head loss is about 1.5 times for elliptical tape than circular tape.