Post-earthquake Prioritization of Bridge Inspections

Abstract

Bridge damage reports from the 2001 Nisqually earthquake were correlated with estimates of ground-motion intensity at each bridge site (obtained from ShakeMaps) and with bridge properties listed in the Washington State Bridge Inventory. Of the ground-motion parameters considered, the percentage of bridges damaged correlated best with the spectral acceleration at a period of 0.3 s. Bridges constructed before the 1940s, movable bridges, and older trusses were particularly vulnerable. These bridge types were underestimated by the HAZUS procedure, which categorizes movable bridges and older trusses as “other” bridges. An inspection prioritization strategy was developed that combines ShakeMaps, the bridge inventory and newly developed fragility curves. For the Nisqually earthquake, this prioritization strategy would have made it possible to identify 80% of the moderately damaged bridges by inspecting only 481 (14%) of the 3,407 bridges within the boundaries of the ShakeMap. To identify these bridges using a prioritization strategy based solely on epicentral distance, it would have been necessary to inspect 1,447 (42%) bridges. To help the Washington State Department of Transportation (WSDOT) rapidly identify damaged bridges, the prioritization procedure has been incorporated within the Pacific Northwest Seismic Network (PNSN) ground-motion processing and notification software.