Numerical study on drag and heat flux reduction induced by a counterflowing jet for rarefied hypersonic flow over a blunt body

Abstract

This paper focuses on the drag and heat flux reduction induced by a counterflowing jet located on the leading edge of the blunt body head in rarefied hypersonic flows using the direct simulation Monte Carlo method. Flow structures in the flowfield, such as detached shock wave, Mach disk, contact surface, jet layer, and recompression shock wave, are all weakened gradually with the increase in the freestream altitude, and they eventually disappear at the altitude of 90 km. The increase in the jet pressure provides a great drag reduction by up to 53% when it increases from 800 to 1600 Pa, but the proportion of drag on the blunt body head to the total drag is only affected slightly by the jet pressure. A noteworthy finding is that further increasing jet pressure almost have no effect on heat flux variation when it is larger than 1200 Pa. On the whole, jet temperature has a quite weak influence on both flow structures and drag, while heat flux on the blunt body head is closely related to jet temperature. The results suggest that jet temperature should vary with that of blunt body surface, and moreover, the optimal jet temperature should be moderately lower than the wall surface temperature. In addition, increasing freestream altitude can provide excellent performance of drag reduction, but it causes non-monotonic variation of heat flux. In view of this, it is worth noting that heat flux on the blunt body head actually increases with altitude when the blunt body is in a severely rarefied atmospheric environment, such as the altitude H > 70 km.