Promoting the uniform propagation of multi-fracture through adjusting the injection rate and perforation parameter: A numerical study

Abstract

The strong stress interference and fluid competitive distribution result in the non-uniform propagation of multiple fractures during horizontal well multi-stage hydraulic fracturing (HWMHF). The uniform stimulation effect can be effectively improved by adjusting the injection rate and perforation scheme. In this work, a two-dimensional fluid–solid fully coupled multi-fracture propagation model is established to investigate the pattern of multi-fracture propagation and the flow distribution. The considering factors include the fluid injection rate, the perforation parameters, and the reservoir heterogeneity. The pipe element is developed to realize the free fluid distribution among multiple fractures. The results show that multiple fractures are more likely to initiate simultaneously and propagate uniformly with a higher fluid injection rate. The stress interference among multiple fractures can be balanced and the equilibrium propagation degree of multiple fractures can be greatly improved by reducing the perforation number. In the homogeneous reservoir, when the fluid injection rate is 12 m3/min and the perforation number per cluster is reduced to 10, the difference coefficient of fluid distribution can be reduced to 3.31%. In the heterogeneous reservoir, multiple perforation clusters with different tensile strengths can generate nearly uniform fractures by increasing the fluid injection rate and reducing the perforation number. When the fluid injection rate is 12 m3/min and the perforation number per cluster is 6, the difference coefficient of fluid distribution can be reduced to 3.26%. This work is of great significance in clarifying the propagation pattern and optimizing the fluid injection rate and the perforation number to improve the uniform propagation degree of multiple fractures.