Pelton turbine jet flow investigations using laser Doppler velocimetry

Abstract

Hydropower is a sustainable and clean renewable energy source. The Pelton turbine is an impulse type of hydraulic turbine and operates under high head and low discharge. It comprises an injector, which converts high-pressure water into kinetic energy as a high-speed free surface water jet that impinges on the runner generating power coupled with an electric generator. The water is highly accelerated in the nozzle, which produces turbulent kinetic energy in the jet flow. Before impinging on the runner, the surrounding air is entrained into the jet, which causes the jet dispersion. The effective conversion of water energy into mechanical energy and the quality of a jet depend significantly on the uniformity of the jet. However, the jet encounters instabilities and non-uniformity caused by secondary flow and turbulence. Jet surface and velocity distribution do not remain symmetric. Investigation of the jet's velocity profile and turbulence intensities is important to understand the flow behavior and improvements in the design of injector. In this study, the experimental investigation of the jet has been performed using the laser Doppler velocimetry (LDV) system. The turbulent intensity and instantaneous velocity of the jet are analyzed at different locations along the jet flow. The velocity wake zone occurs around the center of the jet, which diminishes in the axial direction of the jet, with non-dimensional jet velocities values 0.91, 0.92, and 0.94 at x/Do of 0.5, 1, and 2 for ∼98% nozzle opening. The secondary flow velocity magnitude is larger for 90°–60° injector jet flow than for 90°–50°. The jet velocity profile obtained from the LDV has been compared with computational fluid dynamics analysis.