A multifunctional hydrogel-based strain sensor and triboelectric nanogenerator for running monitoring and energy harvesting

Abstract

Recently, flexible wearable electronics for human running posture monitoring and human energy harvesting have attracted widespread attention. Hence, we design a mixed type conductive hydrogel based on polyvinyl alcohol, cotton paper, graphite oxide, and MXene, named PCGM hydrogel. Furthermore, the PCGM hydrogel can act as the PCGM-based strain sensor and triboelectric nanogenerator (P-TENG) for running posture monitoring and mechanical energy harvesting. The PCGM-based strain sensor has two sensing linear regions: The pressure sensitivity is 0.0164 kPa−1 in the low pressure region (0–16 kPa), whereas it is 0.002 86 kPa−1 in the high pressure region (16–120 kPa). To achieve comprehensive health monitoring of runners, the PCGM-based strain sensors can be installed on human joints and facial skin to monitor human posture and facial expressions. The PCGM hydrogel can be combined with a polytetrafluoroethylene film to form a P-TENG device for mechanical energy harvesting. The P-TENG maximum output power can reach 135 µW with a 30 MΩ load. The short-circuit current (Isc), open-circuit voltage (Voc), and transfer charge (Qsc) of P-TENG can reach 10.36 µA, 229.85 V, and 49.24 nC, respectively. This research provides an effective approach for human-running motion monitoring by using multifunctional flexible devices.