Affiliation:
1. Faculty of Chemical Technology , University of Chemistry and Technology , Prague, Technická 5, 166 28 Prague , Czech Republic
Abstract
Abstract
The aim of this paper is to determine the effect of dealkalization of the glass surface on the quality of adhesion of bonded parts to the glass. Most of the available studies on glass dealkalization tend to focus only on the properties of the glass itself and the processes taking place in the surface layers of the glass. However, in practice focused on adhesion, the cleanliness of the glass surface is an important factor, which is influenced, among other things, by dealkalization. In this work, the influence of the use of gaseous SO2 in the furnace on the composition of the glass surface and on the resulting adhesion is assessed. Regarding the deterioration of the adhesion quality between the glass treated with SO2 gas and the adhesion promoter, the cleaning efficiency of the glass surface was further tested, according to the results of the cross-cut test.
Subject
General Materials Science
Reference31 articles.
1. 1. Pilkington, L. A. B. The float glass process. Proc. R. Soc. London, Ser. A 1969, 314, 1–25.
2. 2. Nascimento, M. L. F. Brief history of the flat glass patent – Sixty years of the float process. World Patent Information 2014, 38, 50–56.
3. 3. Shou, P.; et al. Continuous forming of ultrathin glass by float process. International Journal of Applied Glass Science 2019, 10, 275–286.
4. 4. Shelby, J. E. Introduction to glass science and technology, 2nd ed.; Royal Society of Chemistry: Cambridge, 2005.
5. 5. Wondraczek, L.; et al. Towards ultrastrong glasses. Adv. Mater. (Weinheim, Ger.) 2011, 23 (39), 4578–4586.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献