Research of Dynamic Processes in an Anvil During a Collision with a Sample-Reference-Cited by-同舟云学术

Research of Dynamic Processes in an Anvil During a Collision with a Sample

Published:2023-02-15 Issue:1 Volume:17 Page:104-111
ISSN:2300-5319
Container-title:Acta Mechanica et Automatica
language:en
Short-container-title:

Author:

Pyr’yev Yuriy¹^ORCID,Penkul Andrzej²^ORCID,Cybula Leszek²^ORCID

Affiliation:

1. Faculty of Mechanical and Industrial Engineering, Institute of Mechanics and Printing , Department of Printing Technologies , Warsaw University of Technology , ul. Konwiktorska 2, 00-217 Warsaw , Poland

2. Faculty of Mechanical and Industrial Engineering, Institute of Mechanics and Printing , Department of Mechanics and Weaponry Technology , Warsaw University of Technology , ul. Narbutta 85, 02-524 Warsaw , Poland

Abstract

Abstract The paper concerns modelling the dynamics of the contact system of the tested sample with an elastic half-space (anvil) during their collision. The original elements in the paper include the proposed general approach to solving the problem of contact dynamics. The presented approach consists in determining the force of impact on the sample during the collision and the joint solution of the problem for the tested sample and the problem for an elastic semi-space under the conditions of the assumptions of Hertz’s theory. The resulting interaction forces allow the determination of displacements and stresses.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering,Control and Systems Engineering

Link

https://www.sciendo.com/pdf/10.2478/ama-2023-0012

Reference43 articles.

1. 1. Taylor G. The use of flat-ended projectiles for determining dynamic yield stress. I. Theoretical considerations. Proc. R. Soc. London Ser. A. 1948;194:289–299.10.1098/rspa.1948.0081

2. 2. Whiffin AC. The use of flat-ended projectiles for determining dynamic yield stress. II. Tests on various metallic materials. Proc. R. Soc. London, Ser. A. 1948;194:300–322.10.1098/rspa.1948.0082

3. 3. Carrington WE, Gayler MLV. The use of flat-ended projectiles for determining dynamic yield stress. III. Changes in microstructure caused by deformation under impact at high-striking velocities. Proc. R. Soc. London, Ser. A. 1948;194:323–331.

4. 4. Włodarczyk E, Michałowski M. Penetration of metallic half-space by a rigid bullet. Problemy Techniki Uzbrojenia. 2002;31(82):93–102.

5. 5. Włodarczyk E, Sarzyński M. Analysis of dynamic parameters in a metal cylindrical rod striking a rigid target. Journal of Theoretical and Applied Mechanics. 2013; 51(4):847-857.