Author:
Ksouri Dalila,Khireddine Hafit,Aksas Ali,Valente Tiago,Bir Fatima,Slimani Nadir,Cabal Belén,Torrecillas Ramón,Santos José Domingos
Abstract
Abstract
In this work ternary bioactive glasses with the molar composition 63 % SiO2, 28 % CaO, and 9 % P2O5 have been prepared via sol-gel processing route leading to xerogel or aerogel glasses, depending on the drying conditions. Two types of drying methods were used: atmospheric pressure drying (evaporative), to produce xerogels, and supercritical fluids drying, to obtain aerogels. Both dried gels were subjected to heat-treatment at three different temperatures: 400, 600 and 800 ºC in order to the removal of synthesis byproducts and structural modifications. The resulting materials were characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA) and differential thermal analysis (DTA), and by in vitro bioactivity tests in simulated body fluid. The influence of the drying and the sintering temperature of their structure, morphology, and bioactivity of the final products were evaluated. The results show a good bioactivity of xerogel and aerogel bioactive glass powders with the formation of an apatite layer after one day of immersion in SBF solution for aerogel bioactive glass powders and a particle size less than 10 nm. An apatite layer formed after 3 days in the case of xerogel bioactive glass powders and a particle size around 100 nm.
Subject
Health, Toxicology and Mutagenesis,Food Science,Biotechnology,Analytical Chemistry
Reference30 articles.
1. Effect of surface roughness of hydroxyapatite on human bone marrow cell adhesion proliferation differentiation and detachment strength;Deligianni;Biomaterials,2001
2. study of the electrophoretic deposition of bioactive glass - chitosan composite coating;Mehdipour;Int,2012
3. Sol - gel synthesis of a new composition of bioactive glass in the quaternary system SiO Na Comparison with melting method Non -;Lucas;Cryst Solids,2011
4. Fabrication of bioactive glassceramic foams mimicking human bone portions for regenerative;Rainer;medicine Acta Biomater,2008
5. Fabrication of nanocomposite mat through incorporating bioactive glass particles into gelatin poly ε caprolactone nanofibers by using Box - Behnken design;Gönen;Mater Sci Eng,2016
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献