DIRECT FUEL SUPPLY SYSTEM WITH ELECTRONICALLY CONTROLLED RING VALVE

Author:

Gabdrafikov Fanil'1,Harisov Denis2,Galiev Ilgiz3

Affiliation:

1. Bashkir State Agrarian University,

2. Bashkir State Agrarian University

3. Kazan State Agrarian University

Abstract

The studies were carried out with the aim of developing a method for skipping fuel supplies (turning off individual working piston strokes) at low crankshaft rotational speeds and at partial engine operating modes at low load in direct-acting fuel supply systems to improve fuel efficiency. The developed method is easily implemented using an electronically controlled ring-type discharge valve. A valve made in the form of rigid elastic ring and installed in the high-pressure line above the plunger pair regulates fuel skip. An electromagnet located in the cavity of the annular valve controls it using an electronic regulator, acting at the right time according to the signals coming from the sensors of the engine crankshaft speed, the volume of incoming air and the position of the piston. The proposed fuel supply system of direct action with an electronically controlled annular valve reliably ensures the speed and load characteristics of the engine by influencing the number of cycle fuel supplies. With a decrease in the load and speed of the engine crankshaft, the number of fuel supply cycle’s decreases due to a decrease in signals to the electromagnet winding and, as a result, the valve is not attracted and the fuel supply is skipped. A decrease in the unevenness of the fuel supply in terms of the dynamic component that occurs when the supply is turned off is ensured by a decrease in the inertia of the regulator action due to the electronic control of the annular valve. The developed mathematical model of a direct-acting fuel supply system with an annular pressure valve makes it possible to reveal the relationship between the fuel supply parameters and the design dimensions of the split ring. Such a fuel supply system of direct action with an electronically controlled delivery valve allows, due to skipping of working strokes in low load and idle modes, redistributing the provided volume of fuel to working cylinders, significantly reduce fuel consumption

Publisher

Infra-M Academic Publishing House

Reference11 articles.

1. Астахов И. В. Топливные системы и экономичность дизелей / И. В. Астахов, Л. Н. Голубков, В. И. Трусов и др. - М. : Машиностроение, 1990. – 287., Astakhov IV. Golubkov LN, Trusov VI. Toplivnye sistemy i ekonomichnost' dizelei. [Fuel systems and efficiency of diesel engines]. Moscow: Mashinostroenie. 1990; 287 p.

2. Габдрафиков Ф.З. Динамическая модель переходного процесса работы дизельного двигателя/ Габдрафиков Ф.З., Шамукаев С.Б. Механизация и электрификация сельского хозяйства. 2010. № 9. С. 22-24., Gabdrafikov FZ, Shamukaev SB. [Dynamic model of the transient process of diesel engine operation]. Mekhanizatsiya i elektrifikatsiya sel'skogo khozyaistva. 2010; 9. 22-24 p.

3. Грехов, Л.В. Топливная аппаратура и системы управления дизелей: учебник для студентов высших учебных заведений / Л. В. Грехов, Н. А. Иващенко, В. А. Марков. - 2-е изд. - Москва: Легион-Автодата, 2005. - 344 с., Grekhov LV, Ivashchenko NA, Markov VA. Toplivnaya apparatura i sistemy upravleniya dizelei: uchebnik dlya studentov vysshikh uchebnykh zavedenii. [Fuel equipment and diesel control systems: a textbook for students of higher educational institutions]. Moscow: Legion-Avtodata. 2005; 344 p.

4. Dexing Qian, Ridong Liao, Jianhua Xiang, Baigang Sun and Shangyong Wang (2016) Fluid-Structure Interaction Analysis on the Performance of the High-Pressure Fuel Pump for Diesel Engines. ASME 2016 International Mechanical Engineering Congress and Exposition. Phoenix, Arizona, USA, 2016, Dexing Qian, Ridong Liao, Jianhua Xiang, Baigang Sun and Shangyong Wang. Fluid-structure interaction analysis on the performance of the high-pressure fuel pump for diesel engines. ASME 2016 International Mechanical Engineering Congress and Exposition. Phoenix, Arizona, USA, 2016.

5. Валеев Д.Х., Гергенредер В.А., Олесов И.Ю. Возможности улучшения экономических и экологических свойств дизелей КАМАЗ-740 отключением цилиндров и циклов на режимах холостых ходов и малых нагрузок // Двигателестроение. - 1991. - № 8. - 9. С. 62 - 69., Valeev DKh, Gergenreder VA, Olesov IYu. [Possibilities for improving the economic and environmental properties of KAMAZ-740 diesel engines by disabling cylinders and cycles at idle and low loads]. Dvigatelestroenie. 1991; 8 (9). 62-69 p.

Cited by 1 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

1. TEST CONTROL OF FUEL PUMPS OF MODERN AUTOTRACTOR EQUIPMENT;Vestnik of Kazan State Agrarian University;2024-08-13

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3