SUBSTANTIATION AND DETERMINATION OF FURROWER PARAMETERS OF POTATO PLANTER-Reference-Cited by-同舟云学术

SUBSTANTIATION AND DETERMINATION OF FURROWER PARAMETERS OF POTATO PLANTER

Published:2022-11-10 Issue:3 Volume:17 Page:84-89
ISSN:2073-0462
Container-title:Vestnik of Kazan State Agrarian University
language:en
Short-container-title:

Author:

Kalimullin Marat¹,Haliullin Damir¹,Gayfullin Ilnur¹,Hamitov Radik¹

Affiliation:

1. Kazan State Agrarian University

Abstract

Furrow formation is one of the most labor-intensive operations in potato cultivation technology. The article discusses the justification and determination of furrower parameters of the potato planter. Analytical dependences of the height of the junction point of the disks and the width of the furrow bottom are obtained, taking into account the technological parameters, its design features and the physical and mechanical properties of the soil. Potatoes are planted in the usual way. The main row spacing in our country is 70 cm. However, in areas of high humidity and in irrigated areas, wide-row planting with a row spacing of 90 cm is used. In some areas of the European part, in arid areas, potatoes are planted with a row spacing of 60 cm. By the time of harvesting, the potato field has a ridged appearance, obtained as a result of hilling, where the height of the ridges is 11…20 cm. The angle of the row seed drills is that the vanishing point of the coulter rises above the bottom of the furrow by 6.3 cm. With an increase in the angle of entry of the coulter into the soil from 2° to 11°, the depth of the coulter travel increases. At angle values from 3° to 8°, the stroke depth approaches the optimum (12…18 cm).

Publisher

Infra-M Academic Publishing House

Subject

Energy Engineering and Power Technology,Fuel Technology

Reference21 articles.

1. Анализ и тенденции развития сельского хозяйства в условиях цифровизации / А. К. Субаева, М. Н. Калимуллин, М. М. Низамутдинов [и др.] // Вестник Казанского государственного аграрного университета. – 2022. – Т. 17. – № 1(65). – С. 135-141. – DOI 10.12737/2073-0462-2022-135-141. – EDN AEOBKR., Subaeva AK, Kalimullin MN, Nizamutdinov MM. [Analysis and trends in the development of agriculture in the context of digitalization]. Vestnik Kazanskogo gosudarstvennogo agrarnogo universiteta. 2022; Vol.17. 1(65). 135-141 p. – DOI 10.12737/2073-0462-2022-135-141. – EDN AEOBKR.

2. Белова, М. В. Повышение эффективности функционирования многомодульного агрегата для агроинженерных технологий / М. В. Белова, Б. Г. Зиганшин // Вестник Казанского государственного аграрного университета. – 2013. – Т. 8. – № 3(29). – С. 49-52. – EDN REJNGZ., Belova MV, Ziganshin BG. [Improving the efficiency of the functioning of a multi-module unit for agro-engineering technologies]. Vestnik Kazanskogo gosudarstvennogo agrarnogo universiteta. 2013; Vol.8. 3(29). 49-52 p. – EDN REJNGZ.

3. Использование удобрений из куриного помета для выращивания органической продукции / А. С. Ганиев, Ф. С. Сибагатуллин, Б. Г. Зиганшин и др. // Вестник Казанского государственного аграрного университета. – 2022. – Т. 17. – № 1(65). – С. 9-14. – DOI 10.12737/2073-0462-2022-9-14., Ganiev AS, Sibagatullin FS, Ziganshin BG. [The use of fertilizers from chicken manure for growing organic products]. Vestnik Kazanskogo gosudarstvennogo agrarnogo universiteta. 2022; Vol.17. 1(65). 9-14 p. – DOI 10.12737/2073-0462-2022-9-14.

4. Использование программного комплекса при оптимизации проведения посевных работ по критериям эффективности / Н. И. Семушкин, Б. Г. Зиганшин, А. Р. Валиев [и др.] // Вестник Казанского государственного аграрного университета. – 2013. – Т. 8. – № 2(28). – С. 84-90. – EDN QIYQCD., Semushkin NI, Ziganshin BG, Valiev AR. [Use of a software package in optimizing sowing operations according to efficiency criteria]. Vestnik Kazanskogo gosudarstvennogo agrarnogo universiteta. 2013; Vol.8. 2(28). 84-90 p. – EDN QIYQCD.

5. Проблемы утилизации и переработки органических отходов сельского хозяйства / И. Х. Гайфуллин, Б. Г. Зиганшин, А. И. Рудаков [и др.] // Agricultural machinery 2018: VI international scientific congress. – Burgas: Scientific-Technical Union of Mechanical Engineering INDUSTRY 4.0, 2018. – С. 201-202., Gayfullin IKh, Ziganshin BG, Rudakov AI. [Problems of utilization and processing of agricultural organic waste]. Agricultural machinery 2018: VI international scientific congress. Burgas: scientific-technical union of mechanical engineering INDUSTRY 4.0. 2018; 201-202 p.

Cited by 3 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. THE INFLUENCE OF INDIVIDUAL ELEMENTS OF THE TECHNOLOGY OF CULTIVATING GALA POTATOES ON THE YIELD OF TUBERS IN THE CONDITIONS OF THE ZAKAMYE REGION OF THE REPUBLIC OF TATARSTAN;Agrobiotechnologies and digital farming;2024-05-01

2. THE INFLUENCE OF INDIVIDUAL ELEMENTS OF THE TECHNOLOGY OF CULTIVATING GALA POTATOES ON THE YIELD OF TUBERS IN THE CONDITIONS OF THE ZAKAMYE REGION OF THE REPUBLIC OF TATARSTAN;Agrobiotechnologies and digital farming;2024-05-01

3. METHOD OF CALCULATION AND DESIGN OF SOIL DISPENSER;Vestnik of Kazan State Agrarian University;2023-04-10