Technology of RTL product description model development in the development of CAD soft-ware and analytical complex

Author:

Shehovcov Dmitriy1,Plotnikov A.2,Zolnikov Konstantin3,Zarevich Anton4

Affiliation:

1. JSC «Russian Electronics»

2. AO "Roselektronika"

3. AO "Nauchno-issledovatel'skiy institut elektronnoy tehniki"

4. Voronezh State University of Forestry and Technologies named after G.F. Morozov

Abstract

The article is devoted to the development of a proprietary CAD system designed for the design of various digital microelectronics devices. The presented works were carried out by VSFEU in cooperation with ROSELECTRONICS Holding. Cadence software was used to simulate a digital microprocessor based on SYNTACORE's 32-bit SCR1 core with the implementation of the IMC instruction set. The synthesis of the RTL model for testing was carried out in automatic mode and included a stage of testing for synthesizability and a stage of direct synthesis. The synthesis was carried out on the basis of standard library elements of the selected technology for the 130 nm process of the HHGRACE factory. For the created model, a test of the connection list (netlist) was performed, while the logical model was replaced by a list of circuits. Then the calculation of the power consumed by the circuit was carried out. At the end of the development, various tests aimed at verifying the correctness of the RTL code were carried out for the ready-made model - tests for compliance with specificity, tests for edge cases (corner case testing), tests based on applied tasks and algorithmic testing (real code testing), as well as tests for pico-high performance and throughput of switches and interfaces.

Publisher

Infra-M Academic Publishing House

Subject

General Medicine

Reference22 articles.

1. Характеризация и моделирование сигналов в САПР / В.А. Скляр, В.К. Зольников, А.И. Яньков [и др.] // Моделирование систем и процессов. – 2018. – Т. 11, № 1. – С. 62-67. – DOI: 10.12737/article_5b574c7fd2b815.56868481., Harakterizaciya i modelirovanie signalov v SAPR / V.A. Sklyar, V.K. Zol'nikov, A.I. Yan'kov [i dr.] // Modelirovanie sistem i processov. – 2018. – T. 11, № 1. – S. 62-67. – DOI: 10.12737/article_5b574c7fd2b815.56868481.

2. Разработка проектной среды и оценка технологичности производства микросхемы с учетом стойкости к специальным факторам на примере СБИС 1867Ц6Ф / В.А. Скляр, В.А. Смерек, К.В. Зольников [и др.] // Моделирование систем и процессов. – 2020. – Т. 13, № 1. – С. 77-82. – DOI: 10.12737/2219-0767-2020-13-1-77-82., Razrabotka proektnoy sredy i ocenka tehnologichnosti proizvodstva mikroshemy s uchetom stoykosti k special'nym faktoram na primere SBIS 1867C6F / V.A. Sklyar, V.A. Smerek, K.V. Zol'nikov [i dr.] // Modelirovanie sistem i processov. – 2020. – T. 13, № 1. – S. 77-82. – DOI: 10.12737/2219-0767-2020-13-1-77-82.

3. Кроткова, Н.А. Программируемые логические интегральные схемы (ПЛИС) / Н.А. Кроткова //Научный альманах. – 2020. – №. 9-2. – С. 37-39., Krotkova, N.A. Programmiruemye logicheskie integral'nye shemy (PLIS) / N.A. Krotkova //Nauchnyy al'manah. – 2020. – №. 9-2. – S. 37-39.

4. Методы схемотехнического моделирования КМОП СБИС с учетом радиации / К.В. Зольников [и др.] // Вопросы атомной науки и техники. Серия: Физика радиационного воздействия на радиоэлектронную аппаратуру. – 2014. – № 2. – С. 5-9., Metody shemotehnicheskogo modelirovaniya KMOP SBIS s uchetom radiacii / K.V. Zol'nikov [i dr.] // Voprosy atomnoy nauki i tehniki. Seriya: Fizika radiacionnogo vozdeystviya na radioelektronnuyu apparaturu. – 2014. – № 2. – S. 5-9.

5. Сравнение инструментов высокоуровневого синтеза и конструирования цифровой аппаратуры / А.С. Камкин [и др.] // Труды Института системного программирования РАН. – 2022. – Т. 34, № 5. – С. 7-22. – DOI: 10.15514/ISPRAS-2022-34(5)-1., Sravnenie instrumentov vysokourovnevogo sinteza i konstruirovaniya cifrovoy apparatury / A.S. Kamkin [i dr.] // Trudy Instituta sistemnogo programmirovaniya RAN. – 2022. – T. 34, № 5. – S. 7-22. – DOI: 10.15514/ISPRAS-2022-34(5)-1.

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3