Abstract
The hub motor significantly increases the unsprung mass of electric in-wheel vehicles, which deteriorates the ride comfort and safety of vehicles and which can be effectively improved by optimizing the main suspension parameters of vehicles reasonably, so a multi-objective optimization method of main suspension parameters based on adaptive particle swarm algorithm is proposed and the dynamic model of a half in-wheel electric vehicle is established. Taking the stiffness coefficient of the suspension damping spring and damping coefficient of the damper as independent variables, the vertical acceleration of the body, the pitch acceleration and the vertical impact force of the hub motor as optimization variables, and the dynamic deflection of the suspension and the dynamic load of the wheel as constraint variables, the multi-objective optimization function is constructed, and the parameters are simulated and optimized under the compound pavement. The simulation results show that the vertical acceleration and pitch acceleration are reduced by 20.2% and 18.4% respectively, the vertical impact force of the front hub motor is reduced by 3.7%, and the ride comfort and safety are significantly improved.
Subject
Computational Mathematics,Computer Science Applications,General Engineering
Reference24 articles.
1. Synergy and co-benefits of reducing CO2 and air pollutant emissions by promoting new energy vehicles: A case of Shanghai;Alimujiang;Acta Scientiae Circumstantiae,2020
2. Influence of vehicle speed and acceleration different exhaust gas emission;Fan;Journal of Wuhan University of Technology (Transportation Science & Engineering),2019
3. Optimal planning of the Nordic transmission system with 100% electric vehicle penetration of passenger cars by 2050;Ingeborg;Energy,2016
4. Rule-based traction system failure control of distributed electric drive vehicle;Chu;Journal of Mechanical Engineering,2012
5. Multiple model-based fault-tolerant control system for distributed drive electric vehicle;Liu;Journal of the Brazilian Society of Mechanical Sciences and Engineering,2019