Improved performance of printed electrochemical sensors <i>via</i> cold atmospheric plasma surface modification-Reference-Cited by-同舟云学术

Improved performance of printed electrochemical sensors via cold atmospheric plasma surface modification

Published:2022 Issue:29 Volume:10 Page:10562-10573
ISSN:2050-7526
Container-title:Journal of Materials Chemistry C
language:en
Short-container-title:J. Mater. Chem. C

Author:

Sedaghat Sotoudeh¹²^ORCID,Kasi Venkat¹²,Nejati Sina¹²^ORCID,Krishnakumar Akshay²³,Rahimi Rahim¹²^ORCID

Affiliation:

1. School of Materials Engineering, Purdue University, West Lafayette, IN, 47907, USA

2. Birck Nanotechnology Center, Purdue University, West Lafayette, IN, 47907, USA

3. School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN, 47907, USA

Abstract

Here we report a simple approach to increase the stability performance of all-solid-state electrochemical sensors by improving the interfacial bonding between the ion selective membrane and electrode through cold atmospheric plasma surface treatment.

Funder

Birck Nanotechnology Center, Purdue University

Publisher

Royal Society of Chemistry (RSC)

Subject

Materials Chemistry,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2022/TC/D2TC00905F

Reference50 articles.

1. Development of a nickel oxide/oxyhydroxide-modified printed carbon electrode as an all solid-state sensor for potentiometric phosphate detection

2. Printed Low-Cost PEDOT:PSS/PVA Polymer Composite for Radiation Sterilization Monitoring

3. Laser-Induced Mesoporous Nickel Oxide as a Highly Sensitive Nonenzymatic Glucose Sensor