Modification of the core–shell ratio to prepare PB-g-(MMA-co-St-co-GMA) particle-toughened poly(butylene terephthalate) and polycarbonate blends with balanced stiffness and toughness-Reference-Cited by-同舟云学术

Modification of the core–shell ratio to prepare PB-g-(MMA-co-St-co-GMA) particle-toughened poly(butylene terephthalate) and polycarbonate blends with balanced stiffness and toughness

Published:2014 Issue:102 Volume:4 Page:58880-58887
ISSN:2046-2069
Container-title:RSC Adv.
language:en
Short-container-title:RSC Adv.

Author:

Guo Yang¹²³⁴,Sun Shulin¹²³⁴⁵,Zhang Huixuan¹²³⁴

Affiliation:

1. Engineering Research Center of Synthetic Resin and Special Fiber

2. Ministry of Education

3. Changchun University of Technology

4. Changchun 130012, China

5. Emulsion Polymers Institute and Department of Chemical Engineering

Abstract

Particles with a modified core–shell ratio provide an effective way to prepare polymer blends with a superior balance of toughness and stiffness.

Publisher

Royal Society of Chemistry (RSC)

Subject

General Chemical Engineering,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2014/RA/C4RA08646E

Reference35 articles.

1. D. R. Paul and C. B.Bucknall, in Polymer Blends:Formulation, Wiley-Interscience Publication, New York, 2000

2. L. A. Utracki , in Polymer Blends Handbook, Kluwer Academic Publishers, Netherlands, 2002

3. A Study on Reaction-Induced Miscibility of Poly(trimethylene terephthalate)/Polycarbonate Blends

4. Determination of crystallization parameters and occurrence of trans-reaction in a ternary polymer blend system

5. Structural features and relaxation properties of PET/PC blends containing impact strength modifier and chain extender

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Introduction: role of nanofillers in binary polymer blends;Nanofillers for Binary Polymer Blends;2024

2. Highly reinforcing effect of polycarbonate/poly(ethylene terephthalate) blends by formation of orientation microfibrillar structure;Polymer International;2021-03-15

3. Development of hybrid composites reinforced with biocarbon/carbon fiber system. The comparative study for PC, ABS and PC/ABS based materials;Composites Part B: Engineering;2020-11

4. Development of Thermal Resistant FDM Printed Blends. The Preparation of GPET/PC Blends and Evaluation of Material Performance;Materials;2020-04-29

5. Enhanced Properties of PBT/PC Blends with the Addition of Carboxyl-functionalized Multiwalled Carbon Nanotube;Polymer Korea;2018-03-31