Temporary cable force monitoring techniques during bridge construction-phase: the Tajo River Viaduct experience-Reference-Cited by-同舟云学术

Temporary cable force monitoring techniques during bridge construction-phase: the Tajo River Viaduct experience

Published:2022-05-11 Issue:1 Volume:12 Page:
ISSN:2045-2322
Container-title:Scientific Reports
language:en
Short-container-title:Sci Rep

Author:

Gaute-Alonso Alvaro^ORCID,Garcia-Sanchez David^ORCID,Alonso-Cobo Carlos^ORCID,Calderon-Uriszar-Aldaca Iñigo^ORCID

Abstract

AbstractThis article deals with the comparative analysis of current cable force monitoring techniques. In addition, the experience of three cable stress monitoring techniques during the construction phase is included: (a) the installation of load cells on the active anchorages of the cables, (b) the installation of unidirectional strain gauges, and (c) the evaluation of stresses in cables applying the vibrating wire technique by means of the installation of accelerometers. The main advantages and disadvantages of each technique analysed are highlighted in the Construction Process context of the Tajo Viaduct, one of the most singular viaducts recently built in Spain.

Funder

Horizon 2020 Framework Programme

Publisher

Springer Science and Business Media LLC

Subject

Multidisciplinary

Link

https://www.nature.com/articles/s41598-022-11746-z.pdf

Reference65 articles.

1. Tabatai, H. Transportation Research Board, Inspection and Maintenance of Bridge Stay Cable Systems (National Cooperative Highway Research Program, 2005).

2. Yang, D.-H., Yi, T.-H., Li, H.-N. & Zhang, Y.-F. Correlation-based estimation method for cable-stayed bridge girder deflection variability under thermal action. J. Perform. Constr. Facil. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001212 (2018).

3. Tang, T., Yang, D.-H., Wang, L., Zhang, J.-R. & Yi, T.-H. Design and application of structural health monitoring system in long-span cable-membrane structure. Earthq. Eng. Eng. Vib. 18(2), 461–474. https://doi.org/10.1007/s11803-019-0484-y (2019).

4. Nong, S.-X., Yang, D.-H. & Yi, T.-H. Pareto-based bi-objective optimization method of sensor placement in structural health monitoring. Buildings 11, 549. https://doi.org/10.3390/buildings11110549 (2021).

5. Yang, Y., Li, S., Nagarajaiah, S., Li, H. & Zhou, P. Real-time output-only identification of time-varying cable tension from accelerations via complexity pursuit. J. Struct. Eng. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001337 (2016).

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Enhancing stress measurements accuracy control in the construction of long-span bridges;Scientific Reports;2024-05-14

2. Accurate measurement of the bond stress between rebar and concrete in reinforced concrete using FBG sensing technology;Scientific Reports;2024-01-24

3. Force monitoring of Galfan cables in a long-span cable-truss string-support system based on the magnetic flux method;STRUCT MONIT MAINT;2023

4. Construction-Monitoring Analysis of a Symmetrical Rigid Frame Tied Steel Box Arch Bridge in Southwest China Based on Segmental Assembly Technique;Symmetry;2023-07-18

5. Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method;Symmetry;2023-04-18