Tuning the band gap, optical, mechanical, and electrical features of a bio-blend by Cr2O3/V2O5 nanofillers for optoelectronics and energy applications

Abstract

AbstractThis work presents a facile approach for controlling the optical and electrical parameters of a biopolymeric matrix for optoelectronics. Vanadium oxide (V2O5) and chromium oxide (Cr2O3) nanoparticles (NPs) were prepared and incorporated into the carboxymethylcellulose/polyethylene glycol (CMC/PEG) blend by simple chemical techniques. Transmission electron microscopy (HR-TEM), and X-ray diffraction (XRD) data showed that V2O5 and Cr2O3 exhibited spherical shapes with sizes in the range of 40–50 nm and 10–20 nm, respectively. In addition, the blend's degree of crystallinity was sensitive to the V2O5 and Cr2O3 doping ratios. The scanning electron microscopy (FE-SEM) and the elemental chemical analysis (EDAX) used to study the filler distribution inside the blend, and confirmed the existence of both V and Cr in the matrix. Fourier transform infrared (FTIR) spectroscopy showed that the dopants significantly affected the blend reactive (C–O–C, OH, and C=O) groups. The stress–strain curves illustrated the reinforcing effect of the dopants up to 1.0 $$\text{wt\%}$$ wt\% Cr2O3/V. The transmittance and absorption index spectra in the visible-IR wavelengths decreased with increasing filler content. Utilizing Tauc's relation and (optical) dielectric loss, the direct (indirect) band gap narrowed from 5.6 (4.5) eV to 4.7 (3.05) eV at 1.0  $$\text{wt\%}$$ wt\% Cr2O3/V. All films have an index of refraction in the range of 1.93–2.17. AC conductivity was improved with increasing filler content and temperature. The energy density at 50 °C is in the range of 1–3 J/m3. The influence of V2O5 and Cr2O3 content on the optical conductivity, dielectric constant, loss, and dielectric modulus of CMC/PEG was reported. These enhancements in electrical and optical properties, along with the potential for band gap engineering, offer promising prospects for advanced applications in optoelectronics and energy-related fields.